If your Wyze Cam is not streaming video, you may be experiencing an offline issue. There are a few things you can do to troubleshoot and resolve the issue.

First, check to make sure that your camera is turned on and that the power cord is properly plugged in. If the light on the camera is solid green, the camera is on and streaming. If the light is flashing, the camera is offline.

If the light is on and flashing, try power cycling the camera. Unplug the power cord from the camera, wait 10 seconds, and then plug it back in. If the light is still flashing, try power cycling your router.

If the light is solid green but the video is not streaming, check your internet connection. Make sure you are connected to the internet and that your speeds are adequate.

If you are still having trouble, contact Wyze Support for assistance.

How do I get my WYZE camera back online?

If your WYZE Camera goes offline, you may be wondering how to get it back online. Here are the steps to follow:

1. Check to make sure that your camera is properly plugged in to an outlet and your router.

2. Make sure that your camera is turned on. To do this, press the power button on the back of the camera.

3. If your camera is still not online, unplug it from the outlet and plug it back in.

See also  Canon Camera Manuals Powershot

4. If your camera is still not online, try restarting your router.

5. If your camera is still not online, you may need to reset your camera. To do this, press and hold the reset button on the back of the camera for 5 seconds.

Why does my Wyze outdoor camera say offline?

If your Wyze outdoor camera says “Offline,” there are a few things you can try to get it working again.

First, check to make sure your camera is plugged in and has a good connection to your Wi-Fi router. If it is plugged in and has a strong Wi-Fi signal, try restarting your camera by pressing and holding the power button for 10 seconds.

If your camera is still offline, there may be a problem with your Wi-Fi network. In this case, you can try resetting your router. If that doesn’t work, you may need to call your internet service provider for help.

How do I reset my WYZE camera?

Resetting your WYZE camera is a fairly simple process. This guide will show you how to reset your camera to its factory default settings.

To reset your camera, first remove the power cable from the back of the camera. Next, hold down the reset button on the back of the camera for 10 seconds. After 10 seconds, release the button and reconnect the power cable. The camera will reset to its factory default settings and will be ready to use.

What does camera offline mean?

When a digital camera is offline, it means that it is not connected to a computer or other device that can be used to view or edit the images it captures. This can be due to a number of reasons, including a lack of power or a broken connection.

See also  Camera Cases For Sony A6000

When a camera is offline, it will not be able to take any new photos or videos. However, any photos or videos that were already captured will still be stored on the device. If you have a memory card in your camera, the photos and videos will also be stored on the memory card.

If you need to view or edit photos or videos that were taken while the camera was offline, you can connect the camera to a computer or other device and view or edit them that way. However, if the camera is not connected to a power source, it will not be able to take new photos or videos.

If your camera is not working properly, you may need to take it to a camera repair shop to have it fixed.

How do I reconnect my offline WYZE camera?

If your WYZE camera is offline, you can reconnect it by following these steps:

1. Open the WYZE app and sign in.

2. Tap the Menu icon in the top-left corner of the screen.

3. Tap Cameras in the menu.

4. Tap the name of the camera that’s offline.

5. Tap Reconnect in the top-right corner of the screen.

6. Follow the on-screen instructions to reconnect the camera.

How do I resync my outdoor WYZE camera?

If you have an outdoor WYZE camera, you may find that it becomes out of sync with the rest of your WYZE cameras. This can be caused by a number of things, such as a power outage or a firmware update. If this happens, you’ll need to resync your camera.

To resync your outdoor WYZE camera, you’ll first need to find its IP address. To do this, open the WYZE app and go to Settings > Camera Settings. Tap on the name of the camera you want to resync, and then scroll down to the bottom of the page. Under IP Address, you’ll see the camera’s IP address.

See also  Camera On Lenovo Not Working

Next, you’ll need to open a web browser and go to the IP address of your camera. When the page loads, you’ll see a login screen. On the login screen, type in the username and password for your camera.

Once you’ve logged in, you’ll see a screen that says “Syncing Outdoor Camera.” Tap on the “Syncing” button, and your camera will be synced with the rest of your WYZE cameras.

How do I reconnect my WYZE camera to WIFI?

How do I reconnect my WYZE camera to WIFI?

If you have lost your WYZE camera’s connection to your home’s WIFI network, there are a few steps you can take to troubleshoot and reconnect the camera.

First, make sure your camera is turned on and that the LED light is flashing blue. If it is not flashing blue, press the power button on the camera for two seconds to turn it on.

Next, check to see if the camera is connected to your home’s WIFI network. To do this, open the WYZE app and click on the “Cameras” tab. If the camera is connected, it will appear in the list of cameras.

If the camera is not appearing in the list of cameras, try the following troubleshooting steps:

-Reboot your home’s WIFI router

-Restart your phone or tablet

-Delete the WYZE app and reinstall it

If you have tried all of these troubleshooting steps and the camera is still not appearing in the WYZE app, please contact WYZE customer support.