There are a few things you can check if your Cobra security camera is not recording.

First, check to make sure that the camera is turned on. The power indicator on the back of the camera should be lit up.

If the camera is on, check the recording status. The recording status indicator on the back of the camera should be lit up if the camera is currently recording.

If the camera is not recording, there may be a problem with the storage media or the network connection. To test the storage media, remove the SD card from the camera and insert it into a computer. If the computer can’t read the card, the problem is with the storage media. To test the network connection, unplug the network cable from the camera and plug it into a different port on the router. If the camera still doesn’t work, there may be a problem with the network connection.

How do I get my Cobra camera to record?

How do I get my Cobra camera to record?

There are a few things you can do to get your Cobra camera to start recording. First, make sure that the camera is turned on and that the recording mode is set to “on.” Next, make sure that the memory card is inserted into the camera correctly. Finally, make sure that the memory card has enough space to store the video. If the memory card is full, the camera will not be able to record.

Why is my security camera not recording?

There are a number of reasons why your security camera might not be recording. Here are some of the most common reasons:

Incorrect Settings: One of the most common reasons for security cameras not recording is that the user has not set them up correctly. Make sure you are familiar with your security camera’s settings and configure them correctly for your needs.

Low Disk Space: If your security camera’s disk space is full, it will not be able to record new footage. Make sure you regularly delete old footage to free up space.

Dead Battery: If your security camera runs on batteries, it will not be able to record footage if the batteries are dead. Make sure you regularly check the batteries and replace them if necessary.

Network Issues: If your security camera is not connected to the internet, it will not be able to record footage. Make sure your security camera is properly connected to your network.

Damaged Camera: If your security camera is damaged, it will not be able to record footage. Make sure you regularly inspect your security camera for damage and repair or replace as necessary.

How do I reset my Cobra surveillance system?

If you are having trouble resetting your Cobra surveillance system, the following instructions will guide you through the process.

First, make sure that the system is turned off. Next, disconnect the power adapter from the back of the system and plug it back in. Then, press and hold the Reset button on the back of the system for 10 seconds. Finally, release the button and wait for the system to start up.

What to do if DVR is not recording?

If your DVR is not recording, there are a few things you can do to troubleshoot the issue. First, make sure that the DVR is turned on and that the cable or satellite box is plugged in. If the DVR is on and the cable or satellite box is plugged in, try resetting the DVR by unplugging it from the wall for a few seconds and plugging it back in. If that doesn’t work, you may need to call your cable or satellite provider for assistance.

How do I setup my Cobra wireless surveillance system?

Setting up a Cobra wireless surveillance system is a great way to keep an eye on your property without having to worry about running wires. Follow these simple steps to get your system up and running in no time.

First, you’ll need to decide where you want to place your cameras. They can be mounted indoors or outdoors, but make sure they’re in a location where they can capture the desired area.

Once you’ve chosen a location, you’ll need to determine the best placement for the receiver. The receiver should be placed in a central location so that all of the cameras can send signal to it.

Next, you’ll need to connect the cameras to the receiver. This can be done using the included cables, or if the cameras are wireless, they can be connected to the receiver using the included antennas.

Once the cameras are connected to the receiver, you’ll need to power them on. The cameras will automatically start to send signal to the receiver, and you’ll be able to view the live video feed on your TV or computer.

That’s it! Your Cobra wireless surveillance system is up and running.

How do I setup my Cobra security camera system?

When it comes to security, a Cobra security camera system is a great investment. These systems are easy to set up, and can be used to monitor your home or office. In this article, we will provide you with a step-by-step guide on how to set up your Cobra security camera system.

The first step is to determine where you want to place your cameras. You will want to place them in a location that provides a clear view of the area you wish to monitor. Once you have determined the location, you will need to mark the spot with a piece of tape or a marker.

Next, you will need to remove the camera from the packaging and connect the power supply. Once the power supply is connected, you will need to plug the camera into an outlet. The camera will then automatically turn on and begin to record.

The final step is to connect the camera to your smartphone or computer. To do this, you will need to download the Cobra app or go to the Cobra website. Once you have installed the app or logged in to the website, you will be able to view the live footage from your camera.

How do you reboot a security camera?

There may come a time when you need to reboot your security camera. Maybe it’s not working properly, or you need to clear out any old footage. Rebooting a security camera is a fairly simple process, but there are a few things you should keep in mind.

First, make sure your camera is turned on. If it’s not, turn it on and wait for it to power up. Once it’s on, find the reboot button. On most cameras, it will be a small button located near the power button. Push and hold the reboot button until the camera restarts.

It’s also important to note that rebooting a security camera will erase all of the footage on the camera. So if you’re looking to keep any of the footage, make sure you save it before rebooting.

That’s all there is to it! Rebooting a security camera is a quick and easy process, and it can help resolve any issues the camera may be having.